Antistatisch

For small to medium-sized packaged goods, our PE dimpled foam boxes ensure a secure lining (pink). In addition, they provide protection against antistatic charge (dissipation), as in this case study. Products can be packed ultra-fast and at the same time they are kept shock- and scratch-proof during shipping due to the soft padding of the foam material.

We use this square foam insert with lid for safe and anti-static transport of electronic components. The slots in the ESD-protected foam guarantee the safe retention of individual circuit boards. The foam inserts are ideally suited for durable, multi-use on conveyor belts.

Our electrically conductive dimpled foam inlays ensure safe ESD protection; especially suitable for linings of transport containers, as lids or other cushioning components of packaging containers. The soft material can be optimally shaped and offers excellent impact resistance properties thanks to the dimple array. ESD protective packaging is indispensable for preventing the build-up of electrostatic charges during transport.

Our ESD packaging solutions optimally protect valuable electronics from static charges. Specially treated corrugated cardboard boxes with a shielding layer can compensate damaging voltages. The example shows a simple box with a lid in ESD version. Combined with a corresponding ESD foam, we guarantee a high level of component protection.

This ESD foam (pink) with its anti-static coating is suitable for optimal protection of sensitive electronic components. The polyethylene foam can be easily contoured to easily accommodate complex shapes or openings for products of various shapes including round products. A further advantage is that the matrix structure of the material behaves in a highly energy-absorbing manner in the event of impacts.

This antistatic lattice compartment made of foam is used for safe separation of components, mostly intended for larger outer packaging, for example in plastic containers. The division into individual compartments provides your packaged goods in a sorted and visible manner, thus simplifying their use. The separation by wide webs prevents the products from bumping against each other.

We offer our high quality cardboard dividers to many customers in the electronics industry. With excellent ESD protection, the packaging of sensitive components is possible without any problems. The ESD packaging therefore rounds off the transport protection for products such as electronic components, printed circuit boards and many more.

Pink finished carriers made of polyethylene foam, as shown in the figure, indicate very high quality ESD protection. This particular foam packaging has anti-static characteristics. ESD packaging prevents electrostatic build-up or discharges, often caused by mechanical friction, from damaging the packaged products. The foam is suitable for complex packaging applications requiring detailed contouring and optimal cushioning and protection against impact.

This carrier made of pink colored PE foam (pink indicates anti-static) can be used as for electrostatic sensitive devices or components. Electrostatic charges can occur at any time during transport, but are optimally dissipated by the foam. The soft material is also excellent for durable cushioning and protection against impacts.

Electric fields can occur anytime and anywhere, this can be dangerous to electronic components and assemblies. Protect your valuable electronics from these hazards with appropriate ESD packaging solutions. Protective layers, for example a treated corrugated cardboard or an appropriate foam inlays, protect the products from damaging voltages.

The main area of use of anti-static foam packaging is the electronics industry. Due to their versatile properties, the anti-static foams (pink) can be used in almost all applications where packaged devices and components could be damaged by static charges!

The ESD-protected container with foam liner can be optimally adapted to automated production processes at the customer's request. This makes the packaging combination effectively suitable for use in repetitive production processes. Thanks to the anti-static design (by means of electrically conductive plastic), sensitive electronic components can be stored and transported in the small load carrier (KLT) without any problems.

The pink foam (see picture) is suitable for the protection of sensitive electronic components due to its anti-static properties. We provide the best packaging protection to round packaged products using universal polyethylene foam inlays including integrated nests. Another advantage is that the crosslinked structure of the material is highly shock-absorbing in case of impact.

Individual ESD packaging by DE-PACK - The perfect protection for your electronics.

We use lightweight twin-wall sheets to form a stable frame for our anti-static foam inlays. The contoured foam inlays guarantee the secure retention of the components. The foam inserts are reusable in the shipping of electronic components or circuit boards.

A small load carrier combined with a tailored component carrier made of polyethylene foam is suitable for products of all kinds. For example, the transport of pump components from the sanitary industry.

The sturdy VDA cover panel (A1208) ESD is used to cover a set of containers (KLT) on a pallet, suitable for: 8 containers 400 x 300 mm or 4 containers 600 x 400 mm. The outer dimensions of the cover panel are 1200 mm long x 800 mm wide. The cover panel protects the entire load in the best possible way against transport damage and soiling. The cover panels are available in quantities of 35 pieces per pallet.

Container Lid, compatible with RL-KLT ESD series

For containers with external dimensions: 600 x 400 mm (L/W). Available in black, made of electrostatically dissipative polypropylene (PPL). The lids close dust-tight. The KLT containers remain stackable with lids.

Container Lid, compatible with RL-KLT ESD series

For containers with external dimensions: 400 x 300 mm (L/W). Available in black, made of electrostatically dissipative polypropylene (PPL). The lids close dust-tight. The KLT containers remain stackable with lids.

RL = Designed with rigid, smooth bottom 
With ESD-Protection

RL = Designed with rigid, smooth bottom 
With ESD-Protection

RL = Designed with rigid, smooth bottom 
With ESD-Protection

RL = Designed with rigid, smooth bottom 
With ESD-Protection

RL = Designed with rigid, smooth bottom 
With ESD-Protection

RL = Designed with rigid, smooth bottom 
With ESD-Protection

Container Lid, Compatible with R-KLT ESD Series

For containers with external dimensions: 600 x 400 mm (L/W). Available in black, made of electrostatically dissipative polypropylene (PPL). The lids close dust-tight. The KLT containers remain stackable with lids.

Container Lid, Compatible with R-KLT ESD Series

For containers with external dimensions: 400 x 300 mm (L/W). Available in black, made of electrostatically dissipative polypropylene (PPL). The lids close dust-tight. The KLT containers remain stackable with lids.

Container Lid, Compatible with R-KLT ESD Series

For containers with external dimensions: 300 x 200 mm (L/W). Available in black, made of electrostatically dissipative polypropylene (PPL). The lids close dust-tight. The KLT containers remain stackable with lids.

R = Designed with rigid, composite bottom 
With ESD-Protection

R = Designed with rigid, composite bottom 
With ESD-Protection

R = Designed with rigid, composite bottom 
With ESD-Protection

R = Designed with rigid, composite bottom 
With ESD-Protection

R = Designed with rigid, composite bottom 
With ESD-Protection

R= Designed with rigid, composite bottom 
With ESD-Protection

R = Designed with rigid, composite bottom 
With ESD-Protection

Our reusable perforated trays are particularly suitable for cylindrical products, which are optimally protected against mechanical damage, dust and contamination with a particularly high packing density. The perforated trays are available with optimized cavitiy design, stackable or rotatable and suitable for automated processes.

To ship electronic components or circuit boards with sensitive surfaces and complicated geometries, antistatic inlays made of PE foam are ideal because they can be easily combined with appropriate outer packaging for transport. The milled notches ensure that the components are securely held and locked in place to prevent them from slipping.

Customized foam packaging made exactly according to your specifications - that's what DE-PACK is all about. We always have the right ideas and first-class, dimensionally stable packaging solutions at the ready for you. For example, as shown in the illustration, foam trays with ESD protection for the transport of electronic components such as printed circuit boards.

We offer you individual, precisely fitting foam packaging solutions or cushions with ESD protection according to your specifications. These packaging solutions made of antistatic PE or PU foams, are ideally suited for the safe shipment of electronic components such as printed circuit boards.

Voltage fields are always lurking everywhere, which means that uncontrolled electrostatic discharges can occur under certain conditions. Therefore, it is extremely important to protect electronic components or assemblies from this type of damage. The illustration shows an ESD textile divider in which components can be safely stored. Adhesive tapes attached to the sides hold the dividers securely in place, for example in small load carriers.

DE-PACK offers thermoformed disposable and reusable carrier systems made of plastic. The trays are designed with extremely accurate cavities for automated handling. If you need thermoformed trays with ESD protection, you have come to the right place.

This thermoformed round packaging with ESD protection is used to pack a highly sensitive circuit boards. The thermoformed packaging is additionally provided with an antistatic, transparent lid made of PET, which protects the board from electrostatic charge and dust. This packaging solution was developed in close cooperation with the customer to ensure that the products are safe during transport between supplier and manufacturer.

For the transport of high-quality printed circuit boards etc., we recommend ESD protective packaging, as this is able to compensate electrostatic charges in the best possible way. We primarily use ESD foam inlays (PE), whose properties prevent static charges. An example for this is grounding by simply touching the board during the unpacking process, which would result in a damaging discharge.

Our ESD boxes feature high electrostatic protection and are ideally suited for external shipping, as well as for the internal storage of sensitive electronic components. Side cushions with antistatic PE foam pads provide additional drop and impact protection for the packaged products. The ESD boxes are frequently reusable, making them ideal as reusable packaging.

We also develop ultralight textile dividers with ESD protection for special packaging requirements, for example when transporting electrostatically sensitive components. Textile dviders are ideal as inlays for plastic containers or small load carriers.

With precisely manufactured contours and cavities, DE-PACK's durable thermoformed trays ensure that mechanical components can be easily handled. At the same time, we also supply our trays with ESD protection to counteract the antistatic charging of components.

Customized solutions as well as individual designs can be realized very well with PE foams. The trays are used for internal logistics, for example in the automotive industry, or for external transport purposes. The trays are also available with ESD protection.

Anitstatic PE foam trays (colored pink) are ideal for sensitive electronic devices or components. At the same time, the products are optimally cushioned and permanently protected inside the foam trays. The area of application is primarily the electronics industry.

DE-PACK small load carriers with ESD protection perfectly meet almost all requirements for transport and warehouse logistics. Small load carriers are stackable, can be combined with other containers of different sizes and are also available with ESD protection. In the picture, the container is equipped with a foam divider with hinged lids. This way your products are ideally protected and stored.

These PE foam dividers are individual solutions by DE-PACK, especially designed for small load carriers. The devider is provided with a hinged lid on both sides and can be placed inside the small load carrier in multiple layers. Your sensitive components are safely separated and secured against falling out by the lids. This solution is also available with ESD protection!

PE foam bonded to a twin wall sheet. This perfect combination is a stable and lightweight transport packaging solution with which sensitive circuit boards can be held securely in place. The load carriers can be ideally used in the electronics industry, for example.

Upon request, we offer individual packaging solutions made of PE foam according to your specifications. PE foams can be produced true to size and contour. For examples as inlays for containers or outer boxes. This way, they ensure a secure hold for your products. Due to the soft material and the smooth surface, damage or scratches can be eliminated.

The durable and shock resistant load carriers are particularly suitable when fast loading and unloading is required. Products such as stamped parts, precision parts or injection moulded parts are securely stored and can be precisely fitted into the thermoformed packaging. This type of packaging is also available with ESD protection.

Two-part dimpled foam sliding boxes consisting of corrugated cardboard (outer packaging) and a sliding part made of soft PU foam are perfect for protecting all kinds of products during transport. The dimpled foam adapts perfectly to the shape of the product to hold it in place.

This durable ESD transport packaging is especially suitable for high quality and sensitive products. Due to the stable design of the thermoformed cavities, they ensure the safe transport of components and assemblies. At the same time, they provide excellent protection against static charging (ESD protection).

PU dimpled foam inlays by DE-PACK ensure safe padding (including ESD protection) of transport containers. In this case, the foam inlay serves as a holding-down device for a VDA load carrier.

DE-PACK offers thermoformed packaging solutions, also with ESD protection, which are optimally customized to the characteristics of your product. The load carriers are characterized by their stability and precise fit. With our plastic packaging, the safe transport, for example in the automotive industry, is guaranteed.

DE-PACK offers thermoformed packaging solutions for a wide range of industry applications. Our thermoformed trays are safe and durable packaging solutions for particularly high quality, heavy and sensitive products. Also available with ESD protection on request.

Load carriers with ESD protection protect components from electrostatic charge in the production process, during transport or during storage.

With its elastic and anti-slip foil, this one-part retention package (one-fix) is the best solution to hold products securely and in place. At the same time it protects against damage from shocks, vibrations. Also available in a special ESD version.

Our safe and stable thermoformed trays with ESD protection are particularly suitable for high quality and sensitive products. The durable design of the trays ensures safe transportation of components and assemblies such as printed circuit boards and sensors. At the same time, they provide excellent protection against static charges (ESD protection).

Antistatic PE foam load carriers can be customized and protect your products from shocks and electrostatic charge during transport or storage.

With this customized PE foam load carrier with ESD protection, printed circuit boards are protected in the best possible way for storage or further transport. The field of application is the electronics industry, for example.

ESD-boxes are perfectly suitable for shipping electrostatically sensitive components! With the ideal interior, for example antistatic dimpled foam, the ESD shipping carton provides the necessary electrostatic shielding and offers your components (e.g. circuit boards, microprocessors or chips) additional protection against shock and vibration.

Thermoformed trays with ESD protection by DE-PACK provide all-round protection for sensitive components from the electronics industry. Static charges are successfully prevented by this type of packaging. With precisely manufactured shapes and cavities, for holding and removing mechanical components, we ensure effective and safe handling during production.

PE foam is ideally suited for durable cushioning and shock absorption, especially for complex packaging specifications. The PE foam load carriers can also have antistatic properties, as shown in the picture. The packaging is primarily used for products from the electronics industry, such as sensitive printed circuit boards or other electronic components.